This document replaces Guidelines for Sewage Works Design published by Ministry of Environment on January 2008. Addeddate 2012-04-23 15:50:56 Author Leave a Comment / Civil Books Platform, Environmental Engineering Books / By admin.

Guidelines for Sewage Works Design January 2008 EPB 203 Changes (highlighted) made to the following Sections: 1.1; 4.1; 4.4.7.1; and 4.4.7.2. It provides guidance to municipal wastewater collection and treatment facilities, including engineering report requirements. Publication date 2008 Publisher Ontario Ministry of the Environment Collection omote; toronto; governmentpublications Digitizing sponsor Internet Archive Contributor Ontario Ministry of the Environment Language English. The Criteria for Sewage Works Design serves as a guide for the design of sewage collection, treatment, and reclamation systems. 1. These guidelines have been revised and updated based on Ontario specific engineering practice, the latest Ten States Standards (Recommended Standards for Wastewater Facilities, 2004) and other relevant North American design guidelines and published as the Design Guidelines for Sewage Works (2008). Design Guidelines for Sewage Works 2008.

Sewage pumping stations serving sanitary sewer systems should be able to pump the design peak instantaneous sewage flow. 7.1 General 7.1.1 Station Capacity. iv PREAMBLE The Ontario Ministry of the Environment’s Design Guidelines for Sewage Works is intended for an audience that includes engineers who are responsible for designing sewage works, ministry engineers responsible for reviewing and approving the designs of

Design guidelines for sewage works, 2008. NOTES: It is intended for use by municipal design engineers and consulting engineers. Note that the design flows are defined in Section 8.3 - Definition of Terms. You are using an outdated browser that is no longer supported by Ontario.ca. This design standard applies to all sewage works described in The Waterworks and Sewage Works Regulations and shall be used as a companion to … The design flow criteria for pumping stations serving combined sewer systems are identified where applicable. MOE Design Guidelines for Sewage Works 2008 .

iv PREAMBLE The Ontario Ministry of the Environment’s Design Guidelines for Sewage Works is intended for an audience that includes engineers who are responsible for designing sewage works, ministry engineers responsible for reviewing and approving the designs of MOE Design Guidelines for Sewage Works 2008 .