After you do all 4 barrels you are ready to flip.

Shift the boards around until you get the barrel sitting nicely in between the boards without touching the ground but also fitting nicely around the curve in the barrel. I am since getting a bigger boat and have returned as a reminder how to build this dock. We are sure we have given you enough information related to docks.

Ground Anchors for Decks & Wooden Steps. Here is quick parts list of everything I used:4 - 2x8" pressure treated lumber. Penetrators are heavy duty, durable screw-type anchors made of heat-treated aluminum.

A 55-gallon barrel, (55x10=550#) 4 barrels is 550# x 4, or 2,200# The amount of water displaced (550# per barrel) is the amount of floatation provided. Each-Includes 2 Supports (48866), 2 Pack, Black/Silver, Pylex 12098 33/66 Extendable Deck Support, Black - 5 Pack, BISupply Adjustable Post Jack Screw Temporary Shore Jack 4x4 Shoring Jack Post, Lumber Beam Jack Post Joist Support Jack, Pylex 12098 33/66 Extendable Deck Support, Black - 10 Pack, Pylex 10565 Adjustable Helical Post Black, Pylex 10565 Adjustable Helical Post Black - 10 Pack, Vestil FJB-16 Basement Floor Jack, 12" - 16" Height Range, Maximum Height Capacity (lbs.)

It has got dual valves for quick inflation. Mark that point, screw them in and do the same to the other side.Now the top layer of supports that run perpendicular to the rest also have two jobs. Exception 4(IRC) and Section 9.12.2.2. I didn't screw these in yet incase I needed to make adjustments.At this point you can also ready your barrels. I had to add some dirt underneath the land side just to get everything straight but it wasn't too bad.Now just put the decking on just like before...thanks to those 2x4"s running long ways you have plenty of support for the deck boards.I actually ran out of boards for decking because I wasn't really thinking...remember, after wood gets milled and sent to the store it is no longer it's original dimensions...I calculated for 1x6" boards, when it reality they are more like 3/4x5 1/2"....so I came up short. It inflates in minutes on your boat and weighs only 30 lbs and could be easily secured to the side of any boat and can be stored on a bimini top, once it is inflated. Just curious how much this project roughly costs? I'll be sure to post that once it's complete. Already ordered some cheap blue plastic barrels from http://theplasticbarrels.com, I got a lot of wood so let's do this!

As per the first point, deciding the work before the material is very important.

Note: The following post is by no means the only way to build a deck… I also placed a few on the ramp to keep it from getting pushed to the side. The Solstice floating dock comes along with a compact tote bag as well as 4 stainless heavy-duty corner D rings and a center D ring for holding the cooler, chair, etc. By thew way, do not forget to include the weight of the deck frame, in your calculations.

Once again, bribe a friend with beer (or in my case my friend actually brought the beer) and flip the ramp over and walk it in to the water.Now, this is where this could easily not work for some people depending on their shoreline. Driftsun Mesa Inflatable Floating Dock and Swim-Up Deck Platform, 3. So once you have your parts head out to the body of water you want to place the dock in. Can I build it 8' by 10' and not affect the over all buoyancy?

This particular dock is perfect for boat side water play or for lounging in chairs. Could any another material than wood, be used for the frame? With only 3 of us total we easily go it up on it's side and slid it in to the lake. Customer successfully use our Penetrator anchors to secure decks, wooden steps, yurts, and framing into the ground.

I'm sure i have alot of growth on the barrels but it hasnt affected it at all.

The entire family can have fun with it, irrespective of the age of the members.

They are supporting the frame as well as holding the barrels against the dock and preventing them from pushing up against the decking. This will make sure that everything stays where it is and really tightens up the frame.Now, place eye hooks in the bottom layer of supports where your barrels lay.

Turn a week long job into a weekend project. Did you make this project? Working on the ramp next! This is a very durable and rigid floating platform that can be adjusted very easily as it has a very manageable size. I've already found the poles make great places to lauch bottle rockets from as well as place tiki torches! on Step 9.

Also, different brands are known for making such products. 7 months ago

The dock surface when inflated is 8 inches thick and it could hold more than 2 people at a time. Answer: 2000 lb = f*6*(460 lb) = f*(2760 lb)and f = 0.7246 ~=0.72Anyway, I hope this explanation brings you closer to understanding the math of things that float. Lay your barrels in their slots and tie them up! 95 ($0.81/oz) The dock can be very easily inflated as well as deflated with the help of a double-action hand pump and can be adjusted easily in the storage bag which is included along with. on Step 7. After screwing in the 4x4" post pieces in the corner to solidify the structure you can make things a little more stable with L Braces places at each of the support intersections. it has 11 sides’ welded stainless d-rings, 6 carry handles, and 8 top welded web-loops for secure anchoring and holding accessor.

Drink your beer and hammer in the boards along each support. I started on one eye hook with a knot and ran rope across the barrel, then diagonally, then across again and tied it off on the last eye hook.